2010 Silverado 1500 4wd
Select messages from
# through # FAQ
[/[Print]\]

Rodding Roundtable -> Rodder's Roundtable

#1: 2010 Silverado 1500 4wd Author: 348tripowerLocation: Dexter, Michigan PostPosted: Thu, Nov 09 2017, 7:31 am
    —
I have one of these I bought wrecked. Can anybody tell me if the right front wheel is setback from the factory on this? I have been searching and I can't find any info.
Thanks!

#2:  Author: enjenjoLocation: Swanton, Ohio PostPosted: Thu, Nov 09 2017, 6:45 pm
    —
I called my frame guy, and he told me it should be a quarter inch or less. And that is usually less. He said on an offset front hit it is common for the lower A frame to buckle the frame in just behind the attachment point. It's usually an easy pull.

#3:  Author: 348tripowerLocation: Dexter, Michigan PostPosted: Fri, Nov 10 2017, 6:56 am
    —
enjenjo wrote:
I called my frame guy, and he told me it should be a quarter inch or less. And that is usually less. He said on an offset front hit it is common for the lower A frame to buckle the frame in just behind the attachment point. It's usually an easy pull.




Thanks!



Rodding Roundtable -> Rodder's Roundtable


output generated using printer-friendly topic mod. All times are GMT - 5 Hours

Page 1 of 1

Powered by phpBB © 2001, 2005 phpBB Group